Chrome Rocker Panel Trim By-The-Piece. CAB CORNER EXT CAB PC Per Piece.

Key Points:

• The temperature must be at least 65 degrees Fahrenheit at time of installation.
• Do not install product on newly painted vehicles. Paint must cure completely before any type of adhesive product can be installed.(We recommend one month)
• The vehicle surface must be properly cleaned to get the best adhesion.(See below)
• When the adhesive touches the vehicle surface it will adhere immediately, not allowing any adjustment. Be sure alignment is correct before installing.

Vehicle Surface Preparation:
The surface of the vehicle must be free of any solvents, waxes, dirt, oil, road tar, and any dealer or owner applied paint sealer treatments. A solvent wash which removes all contaminates should be used prior to installing any adhesive products. Automotive degreasers such as MEK (methyl ethyl ketone) can be used. This product can be found at any local hardware store. After cleaning the surface of the vehicle with the degreaser the entire surface must then be wiped down with isopropyl alcohol (rubbing alcohol). Failing to follow either cleaning step or both will void the product warranty.

Installation:
Remove each stainless piece and check the fit and curvature to the vehicle body before removing adhesive liner. The product must match the contour of the vehicle exactly. Failing to dry fit pieces prior to installation will void the product warranty. Remove the liner of the adhesive only when the product is ready to be applied to the vehicle. After removing the liner of the tape be careful not to contaminate the adhesive.

For Rocker Panels:


• All rocker panels are numbered from front to back such as P1, P2, P3 or D1, D2, D3 etc. The "P" indicates passenger side and the "D" indicates driver side.
• Align the door piece first. Apply the door panel by aligning it with either the lower edge of the door or the body side molding. If you are unsure of the placement of a rocker panel please contact the technical department for instructions. Use firm hand pressure after installation to ensure the best adhesion. Align and install all other pieces making sure they match up and are aligned properly with the door panel already installed.

Tips for Care After Installation:


• Do not wash vehicle for 72 hours after product has been installed.
• Periodically clean products with a stainless steel cleaner. This will deter water spots and discoloration.
• Keep product free of salt and other ice deterrents to ensure a long-lasting finish.

Stainless Rocker Panel Installation Video

Ships USA, Canada and other International destinations. We will provide a freight quote to international destinations.

Made to Order, approx 2-3 business days before shipping. Delivery time approx 2-4 business days after shipping.

TERMS AND CONDITIONS OF SALE

RETURN POLICY

TERMS AND CONDITIONS OF SALE:

USE OF WEBSITE
By entering our web site, you agree to comply with the terms and conditions set forth below. If you do not wish to be bounded by these terms and conditions, you may not access, use or purchase from this site either online or by phone.

If you submit an order online and have checked the box stating that you have read and agreed to our Terms and Conditions of Sale, you are agreeing to be bound by these terms. If you do not agree to these terms and conditions, you must not submit or finalize your order, and you may not access, use or purchase from this site either online or by phone.

Our products are advertised for sale exclusively online. Our terms and conditions are posted conspicuously - if you place your order by phone you are also agreeing to be bound by these terms and conditions. If you do not agree to these terms and conditions, you must not place your order and you may not access, use or purchase from this site either online or by phone.

RESPONSIBILITY OF PURCHASER

Customer is responsible for selecting the correct part number for their vehicle. We assume no liability or incidental costs incurred for wrong parts purchased.

All products sold on this web site are strongly recommended to be installed by professionals in the automotive trade who are experienced in installing the particular product that they purchase. Anyone who purchases from this site, including consumers, re-sellers or installers, are accepting responsibility for the proper installation of these products. Consumers are advised to use an installer that warrants their labor against improper installation.

PAYMENTS

All items must be prepaid prior to shipping, we do not ship C.O.D.

We accept payments by Money Order or Credit Cards (no international credit cards).

Billing Addresses for Credit Card Payments
We require your official billing address listed on file with your credit card company in order to obtain an authorization to complete your order even if you ship to a different address.

Shipping to Different Addresses

• Credit Card Payments: We can ship all items to a different address from your billing address, except for 'Tagged' items.
• Money Orders: we can ship to different addresses if paid by Money Order.
• Tagged Items: Body Kits, Lambo Dr Kits, high value and other tagged items can only be shipped to an address that is on account with your credit card company.
  If you wish to ship to a different address than your billing address, you can call your credit card company and ask them to add an alternate or temporary shipping address to your account for the transaction. (Adding this temporary address will not change your official address, it will only give your bank notice that you are authorizing a shipment to an alternate address.) Once we verify your alternate address with your credit card company, we will be able to obtain an authorization to charge your credit card.

CUSTOM/ SPECIAL ORDERS
Custom or Special order items require prepayment before shipping.

Custom or special order items are items that are made to order, painted to order, special size or other non-stocking items.

CANCELLATIONS
Cancellations, after processing your order, if allowed, are subject to a cancellation fee similar to restocking charges if the order has not shipped.

If your order has shipped before notice of cancellation, shipping charges will not be refunded and you will need to request a return and obtain a Return Authorization Number, if the return is allowed as described under "Returns" below.

REFUSED DELIVERIES/ RE-DIRECTED SHIPMENTS
Refused merchandise at time of delivery will incur return freight charges in addition to cancellation or restocking fees.

Customer is responsible for all charges associated with re-directed shipments..

PRODUCT INSPECTION
It is the customer's responsibility to open the package and inspect the items upon delivery. Packages that appear to be damaged should be immediately reported to the freight carrier. Damage due to shipping is the sole responsibility of the freight carrier. All claims are to be made by the customer directly with the carrier. Shipping carriers will not honor late claims.

TEST FIT PARTS (DRY FITTING)
All items should be inspected for defects or damage and "dry fitted" prior to being installed. Installation instructions provided should be followed completely.

We recommend that all items be professionally installed. Any concern or question as to fit or installation should be brought to our attention. We provide technical support during our normal business hours to help with installations.

All reasonable attempts should be made for proper installation before making a return claim. It is our sole discretion to authorize returns for credit or exchange.

RETURN POLICY:

REQUEST FOR AUTHORIZATION
We must be notified of all return claims within 7 days of delivery date of your order. You must call us first to obtain authorization for the return. We will give you instructions on how to ship the return. Do not return items without prior authorization. We will not accept shipments to us without a confirmed Return Authorization Number.

Absolutely no returns will be accepted after 30 days.

Items must be returned in its complete new, unused condition for credit.

Package and Insure Items/ Condition of Parts
If you are instructed to ship your return prepaid, the items must be shipped back within 10 days and insured for its full value against loss or damage. Any items shipped freight collect will be refused and returned to you your expense.

All items authorized for return must be carefully packaged in its original carton including all packing material, or in another box that is suitable to protect its contents.

It is important that you insure your package against shipping damage in transit as items returned in scratched or damaged condition will not be credited. If items are damaged in shipment, you will have to make a claim with your shipper to recover the cost of the item.

CREDITS
Items must be returned in its unused condition for credit. Items not in new, unused conditions will not receive credit.

Shipping and Handling charges are services performed and completed at time of original delivery and are non-refundable.

Items returned under warranty will be exchanged or credited at our option. Liability is limited to replacement value of the

NON-RETURNABLE ITEMS:
Custom or Special Order items are not returnable (Custom or special order items are items that are made to order, painted to order, special size or other non-stocking items).

Painted Orders are not returnable.

Items cut-to-order, such as moldings and vinyl wrap are not returnable.

Clearance Sales: All sales are considered FINAL; clearance sale items are not returnable.

RESTOCKING CHARGES
Restocking charges are fees incurred for inventory control, administration and handling of returns.

Any item, except as described below, returned for any reason other than what is covered under warranty will be subject to a 20% restocking charge.

• Billet Grilles: 25% restocking charge.
• Body Kits: Restocking fees of 25%-30% depending on each Manufacturer Brand.
• Fender Flares: 25% restocking charge.
• Lambo Door Hinges: 25% restocking charge.
• Nerf Bars/ Step Bars: 25% restocking charge.
• Stainless Steel and Chrome Products: 25% restocking charge.
• Rear Window Graphics: Rear window graphics are custom made to order. All Returns and Exchanges are subject to a 20% restocking charge. Customer is responsible to accurately measure the outside of the window to determine the appropriate size graphic before placing order.

LIMITATION of LIABILITY and DISCLAIMER

The AUTOMEGA® web site (www.CustomAutoTrim.com) and the materials therein are provided "AS IS". AUTOMEGA® makes no representations or warranties either express or implied, of any kind with respect to the operation, contents, information, or materials contained therein. You agree that AUTOMEGA®, its directors, officers, employees or other representatives shall not be liable for damages arising from the operation, content or use of the AUTOMEGA® web site. You agree that this limitation of liability is comprehensive and applies to all damages of any kind, including without limitation direct, indirect, compensatory, special, incidental, punitive and consequential damages.

WEBSITE IMAGES

Please be aware that all cars depicted on the website are highly customized cars. Each car has had many modifications made to them including painting and possibly altering of the depicted kit. Please read the description of the part carefully as one or more of the kit options may include a different part then depicted in the image. The depicted parts may have extra work including, but not limited to, molding, cutting, or adding to the original piece. Parts such as lights, splitters, canards, paint, and others accessories are not included unless specifically specified in the product description.

TYPOGRAPHICAL ERRORS

In the event a product is listed at an incorrect price or with incorrect information due to typographical error or error in pricing or product information received from our suppliers, AUTOMEGA® shall have the right to refuse or cancel any orders placed for product listed at the incorrect price. AUTOMEGA® shall have the right to refuse or cancel any such orders whether or not the order has been confirmed and your credit card charged. In any event if your credit card has already been charged for the purchase AUTOMEGA® shall immediately cancel the order and issue a credit.

COPYRIGHTS/TRADEMARKS

All of the contents on this site including graphics, text, logos, button icons, images, audio/video clips and software belongs to AUTOMEGA® and are protected by U.S. and international copyright laws. Any unauthorized use of these materials may be a violation of copyright, trademark and other applicable laws and could result in criminal or civil penalties.

AGREEMENT

This agreement shall be governed by, construed, and enforced in accordance with the laws of the State of California. Venue for any action or proceeding arising out of this agreement, or alleged breach thereof, shall be solely in San Diego County, California, within the City of San Diego, California.

AUTOMEGA ® is a registered trademark of Custom Auto Trim and Graphics, Inc. COPYRIGHT ©1996 - 2014. Custom Auto Trim and Graphics Inc. All rights reserved.

AUTOMEGA® CustomAutoTrim.Com TESTIMONIALS

Clinton H. writes:

Got my order thank you very much for the prompt response. The order [Pinstripe] was perfect , the person that took care of my order was very helpful and making the order was very successful. Thank you ever so much!

Ted Nagorski writes:

Received my order today and am absolutely, positively pleased with the body moulding. This is an exact duplicate of what the truck has originally equipped with. Thanks so much for the fast shipping.

Larry Hatch writes:

..Thank You. Received my Door Trim yesterday. Very high quality. Great service and 2 day shipping. Excellent job.

Dianne Tyler writes:

( Rear Window Graphic RWG1954 ) I love it! It arrived fast! Looks amazing! Was easy to install! Thanks!

Janette Fontaine writes:

Hi, just wanted to show you how great the skull [Part# RWG1999] looks on my 69 VW Beetle. We have gotten quite a positive response from the look of it. Thank you for taking the time to work with us.

Stuart Gray (Australia) writes:

Hi The parts I ordered have just arrived you have given the best service I have ever received from any US supplier. Thank you.

Keith Brown writes:

I just installed the Supra style [spoiler] on my car today and it looks amazing! I had a 1991 Supra turbo along while back and love them. I have a 2002 Volvo c70 convertible now.... and needed something to make it pop. I wanted a Supra style [spoiler] and you guys were the only ones that had it. I don't normally email after a sale but was so happy with the whole thing and wanted to thank you guys...

Chad Hicks writes:

Just wanted to say thank you for the super fast service and shipment of the [body side] molding I ordered. I received the package in less than a full business day. Will be using you again if my shop has the need.

Narelle Thompson writes:

In June 2015, I purchased the vinyl insert trim from Custom Auto Trim.

I have a 1965 Ford GT Mustang that has the channel molding with the vinyl insert trim on the side [body] panels, which was a dealer option in 1965. The vinyl insert trim was original, faded and perished. After a frustrating search I was unable to source the vinyl insert trim in Australia and found Custom Auto Trim [CustomAutoTrim.com] had the same style. The Custom Auto vinyl insert [Part# INSERT] was a perfect fit slotting in the original aluminium channel molding and now the car looks fantastic.

Your service was fast and the communication was excellent. I have attached a few pictures of the before and after just so you can see the difference and how fantastic your trim looks on this 50 yr old vehicle. Thanks again for a great product and fantastic service. 1965 Mustang 'Before' Pic 1965 Mustang 'After' Pic 1 1965 Mustang 'After' Pic 2

Wes Doty writes:

I am very pleased with my order [graphic kit] and I will order from you again and I am going to order for my wife's vehicle..

Mike Marsico writes:

Anita, Wow thanks for the nice part you sent me. It worked out fantastic!!!

David Arrendondo writes:

Thank you very much for such great service. I received the rare rivet-on trims and couldn't be happier.

Kyle Miller writes:

Nice site... I found the perfect graphics for my 1998 ford expedition. My kids are going to be surprised!

Kirk Fritz writes:

I would like to commend Anita for her customer service with respect to my selection on a side molding through AUTOMEGA. She took the time to navigate with me through the web site to get the right product for my needs. Many service agents in her position have an "it's up to you" attitude, and Anita had a proactive "the right product for you" attitude. I thank her, and the molding looks and works great so far.

Dave Barickman writes:

I just wanted to thank you for the great service and VERY quick shipping on the trim [body side molding]. It arrived in Kansas City in two days and was at my door yesterday when I got home. The trim looks great and will work very well on my vehicle. Thanks again!

David Goodwin writes:

Just thought I'd drop you a note to compliment you on your website. It is one of the most pleasant sites I've visited in my quest for Scout accessories. Your use of the colors and animation are well done. Navigation is efficient and all graphics and lettering are easy for these 50-year-old eyes to read. Keep up the good work!

Kathy Schad writes:

I just wanted to tell you how pleased I am with the graphics kit that I ordered from you. It was very easy to install, and really makes the car stand out, not just another white car on the road. I have had many people tell me how much they like it too. I used the extended pieces under the tail lights. I attached 2 pictures to show how the graphics looks on a Pontiac 08 G6 GXP.

Glen Porter writes:

Anita, I really enjoyed talking with you and wish to thank you for such a professional job in handling my order in such a fast time. I don't think I have ever received any better or faster service in my life! I received the rocker panels yesterday and put them on last night; THEY LOOK GREAT!! I am real satisfied with the high quality of material and workmanship and would gladly recommend your products to anyone else who might be interested.

Jeffrey G. Riblett Sr. writes:

I just wanted to let you folks know how pleased I am with my new spoiler and with the experience of buying from you. Two days after placing the order one of your employees called me at home because the paint code I gave didn't match the name of the color. He spent a few minutes on the phone with me helping me find the correct code on the car and explained how things work with painting plastic parts. I was very impressed at that. Customer service means a lot to me and your folks went above and beyond the call of duty. I received the spoiler today via UPS and was very pleased with the packaging and the paint is a dead perfect match! I am very pleased and have stated as much on the Thunderbird and Cougar Club of America (TCCoA) BBS page. I'm sure you will be getting orders from some of our other members. Thanks again for a great product and experience!

Dan Kranker writes:

Hi Anita, Thanks for the prompt, efficient, courteous service. I truly appreciate dealing with a customer service person who not only understands the product, but knows how to talk to people. Dealing with your company has thus far been a pleasure, which is entirely because of your involvement. Now I only hope the product is as nice as the customer service rep!

Nick Griffin writes:

Here it is finally done, the paint job turned out pretty good, after all the time and work it took us to get it here. Feel free to do what you will with these pics, just thought you would like to see were the spoiler was going, once again thanks for the help, I greatly appreciated your service. It is not easy to find good customer service. Pic 1 Pic 2

Gina DuQuesnay writes:

Thanks so much for taking care of [..hub caps]. I looked at what you picked out. Great choice, will work just fine. I really appreciate your help with this. You really went above and beyond customer service. Just wanted you to know that I would recommend you guys to anyone and I would do business with you again. Have a great day.