Chevy Pickup CK Chrome Rocker Panels 1988-1998 Ext Cab 2DR

Chevy Pickup CK Chrome Rocker Panels - 6 1/4 Inches Tall, 10 Pc Set

Part:

#RPT2009M

For vehicles with Fender Flares installed.

Fit: 1988-1998 Chevy Pickup CK Ext Cab 2DR Short Bed

Vehicle Options: For vehicles with Fender Flares installed.
Width: 6 1/4 inches tall
Kit: 10 pc set
Fit Placement: Pieces fit Between the Body Side Molding and the Door Bottom.
MFR: ICI

Priced From:
$188.31

Chevy Pickup CK Chrome Rocker Panels - 5 1/2 Inches Tall, 10 Pc Set

Part:

#RPT0230M

For vehicles without Fender Flares installed.

Fit: 1988-1998 Chevy Pickup CK Ext Cab 2DR Short Bed

Vehicle Options: For vehicles without Fender Flares installed.
Width: 5 1/2 inches tall
Kit: 10 pc set
Fit Placement: Pieces fit from the Body Side Molding on Down.
MFR: ICI

Priced From:
$188.31

Chevy Pickup CK Chrome Rocker Panels - 5 1/2 Inches Tall, 10 Pc Set

Part:

#RPT0263M

For vehicles with Fender Flares installed.

Fit: 1988-1998 Chevy Pickup CK Ext Cab 2DR Short Bed

Vehicle Options: For vehicles with Fender Flares installed.
Width: 5 1/2 inches tall
Kit: 10 pc set
Fit Placement: Pieces fit from the Body Side Molding on Down.
MFR: ICI

Priced From:
$188.31

Chevy Pickup CK Chrome Rocker Panels - 6 1/4 Inches Tall, 10 Pc Set

Part:

#RPT0238M

For vehicles without Fender Flares installed.

Fit: 1988-1998 Chevy Pickup CK Ext Cab 2DR Short Bed

Vehicle Options: For vehicles without Fender Flares installed.
Width: 6 1/4 inches tall
Kit: 10 pc set
Fit Placement: Pieces fit Between the Body Side Molding and the Door Bottom.
MFR: ICI

Priced From:
$188.31

Chevy Pickup CK Chrome Rocker Panels - 8 Inches Tall, 10 Pc Set

Part:

#RPT0252M

For vehicles without Body Side Molding installed.

Fit: 1988-1998 Chevy Pickup CK Ext Cab 2DR Short Bed

Vehicle Options: For vehicles without Body Side Molding installed.
Width: 8 inches tall
Kit: 10 pc set
Fit Placement: Pieces fit from the Body Line or Body Crease on Down.
MFR: ICI

Priced From:
$207.67

CHEVY PICKUP CK Rocker Panels

Chrome rocker panels are one of the only auto accessories that can make a huge change in the appearance to your vehicle in a positive way and in a relatively short amount of time. And you are an huge fan of your CHEVY PICKUP CK and now you want to make sure that the whole world should stand up and take notice of this gorgeous vehicle that you drive. That can easily be done with some personalization efforts on your part and by a company that can give you personal help in the process.

You also want to make sure that your PICKUP CK stays safe and secure every time you take it out on the road, and even when you decide to take it off road. One way to do that is by adding a set of our CHEVY PICKUP CK chrome rocker panels. Stainless rocker panels will make sure that the critical areas at the bottom of your vehicle are protected against the road salt, gravel, muck and other such articles.

Upgrading your vehicle with chrome rocker panels would not only protect it from the various hazards on the road, but would also give it a custom stylish look. You would be sole possession of $make_meta $model_meta that is the envy of the entire neighborhood. These moldings are pre-cut, self-adhering mirror finish lower body rocker molding trim that come in a complete set to fit both sides of your vehicle. Each rocker panel piece is completely backed with factory approved 3M adhesive and is easy to install-just peel and stick. At CustomAutoTrim.Com we have more than three decades of working in the automobile aftermarket and we'll make sure that all that experience is put to good use when helping you upgrade your vehicle.