Auto Accessories
Information
Articles
Coupons
Contact Us for Custom Auto Accessories
1-800-232-6922 8:30AM - 4PM PST

Carbon Fiber Wrap - Carbon Fiber Vinyl

Can't find or afford a carbon fiber part for your vehicle? Try using Dry Carbon Fiber Flexible Wrap.
3M Di-Noc Dry Carbon Fiber Wrap Vinyl Film Sheets - Looks and Feels like Real Carbon Fiber Material!

An affordable option
to Real Carbon Fiber!


Flex Wrap Dry Carbon Fiber Vinyl

This film IS NOT a cheap, carbon fiber image printed on a decal!
3M DiNoc woven carbon fiber fabric look, 3-D textured vinyl material that you can actually feel the texture.

Flexible Wrap Reflects Light just like real carbon fiber fabric
:

  • Flexible and durable - bonds to flat or curved surfaces like roofs,hoods, bumpers, fenders, mirror covers, dashboards,etc.
  • Re-positionable vinyl for trouble-free install.
  • Strong self adhesive, cross hatch design to eliminate bubbles, peel and stick application. Just trim off excess with Exacto knife.
  • 8.5 mil, 3-4 yr outdoor / 12 yr indoor grade vinyl.
Carbon Fiber Wrap your hood, bumper or any other non-porous surface & challenge your friends to tell the difference!
Carbon Fiber Vinyl Wrap Sold in Sheets - - buy a Sample today!

WRAPS AROUND CURVES

BLACK CARBON FIBER WRAP
2 inch x 2 inch Sample $2.75 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 2 Ft Sheet $69.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 3 Ft Sheet $94.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 4 Ft Sheet $114.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 5 Ft Sheet $129.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 6 Ft Sheet $149.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 8 Ft Sheet $199.99 ea. Buy Carbon Fiber Vinyl Film
4 Ft wide x 10 Ft Sheet $229.99 ea. Buy Carbon Fiber Vinyl Film
  • Carbon Fiber Vinyl Wrap Material is sold off the roll, therefore ALL SALES ARE FINAL. We recommend you purchase a sample before ordering larger sizes.
  • Measure your part and add at least 2-3 ft of excess vinyl to allow for wrapping around complex curves. Material should be overlapped if necessary- no butt joints (overlap should be at least 1/4 inch). Make sure you order a long enough sheet for your project. Once we cut your required length to order, it is not returnable.
  • Mid Size vehicles usually wrap a hood with 4 ft x 5 ft sheet of vinyl, however you MUST Measure before ordering!
  • Wrap any flat or curved surface such as Bumpers, Roofs, Hoods, Fenders,
    Door Handles, Dash Consoles, Motorcycles, etc.




Sample Guide to Install Di-Noc Carbon Fiber Film:
Brush on 3M 94 primer on edges and curved areas to enhance the bonding strength of the carbon fiber vinyl film. Peel paper backing away to expose adhesive and lay Carbon Fiber Film over part with plenty of excess material.
Press down carbon fiber wrap and rub into curved areas.
Use a plastic squeege or credit card to activate the adhesive and force the air out. Use moderate pressure. If necessary, you can pull up the carbon fiber vinyl for repositioning.
Apply heat in circular motion. Carbon Fiber Wrap will shrink down and conform to the wrap.
Trim out holes and any excess material with an Exacto knife.
Sample of finished part.
Watch the video of this Carbon Fiber Vinyl Wrap
installation on a Motorcycle.

Carbon Fiber Wrap Textured Film - DiNoc Dry Carbon Fiber Flexible Wrap

Carbon Fiber Vinyl Wrap
If you’re looking for that carbon fiber wrap after market look, then look no further. Custom Auto Trim supplies a high performance carbon fiber DI-NOC vinyl material that looks like the real thing but is more versatile to use, and less expensive than buying a replacement carbon fiber hood for your car or truck. Installed on your fenders, roof, spoilers, side view mirror covers and interior carbon fiber dash plastic, DI-NOC carbon fiber finishes provide that sporty aftermarket look to any car.

Wood Grain Vinyl
Other materials available are the woodgrain 3M DI-NOC wrap films. They were introduced to the auto world more than fifty years ago for car and truck manufacturers looking to achieve the "woody" look without using real wood. This vinyl material has been used on Jeep vehicles, Buick Roadmasters, Dodge Caravan & Chrysler PT Cruisers. It is perfect for the person that is restoring that old station wagon and wants the OEM look.

Thank you for shopping at AUTOMEGA®.
You can order using our secure online shopping cart (available 24 hours a day), or call one of our carbon fiber vinyl wrap experts at 1-800-232-6922 and we would be happy to assist you.



[Graphic Kits] [Truck Graphic Kit] [Racing Graphics] [Flame Graphics]
[Rear Window Graphics] [Motorcycle Graphics]
[Pinstriping Tape]
 
 


AUTOMEGA ® is a registered trademark of Custom Auto Trim and Graphics, Inc.
COPYRIGHT ©1996 - 2010. Custom Auto Trim and Graphics Inc. All rights reserved.
[ Privacy Policy ] [ Body Kits ]
Prices subject to change without prior notice.
We are not responsible for typographical errors on this page.
Actual colors may vary from colors displayed.
All pricing is in US Dollars.