Universal Wings Universal Fit REAR SPOILER
FIT YR MODEL SUBMODEL DESCRIPTION PART
UNIVERSAL SPOILER TIPS:
Car Spoilers and Wings with legs closer together in the middle will fit virtually all vehicles. Car Spoilers and Wings with legs further apart will fit most vehicles with relatively flat and/or squared up trunk lid edges.
If trunk lid is arched, you will be limited to a universal rear spoiler that is curved, or choose a rear wing that has legs very close together. Sometimes use of extra gasket material under the legs will accomodate for any gaps due to arched trunk lids.
Measure trunk lid side to side. Bolt holes in rear spoiler should fall at least 1/4 " from edges of trunk lid. Tip-toTip measurements will give you total length of spoiler in relation to trunk lid plus rear quarter panels.
Leg-to Leg measurements are more critical when the legs of the spoiler sit closer to each end -- the "feet" of the legs should fall within the trunk lid.
Mid High, Thruster and Supra wings are designed with upward curving outer legs and tips and will often fall beyond the trunk lid but will not touch the rear quarter panels when closed. The installer must use his judgment in placing the rear spoiler. Because these type car spoilers are universal, they will fit differently from vehicle to vehicle. The spoiler would still be centered from side to side, but you may need to move it more forward on the trunk lid, if needed, to accommodate fitment of the legs and/or holes. The legs or pedestals on these spoilers form a "V" shape and the outside tips may or may not extend past the trunk lid, depending on its width. The inside portion of the pedestals should fit inside the trunk area enough so the holes will be located at least 1/4" from the edges. On some vehicles you will have more room for the holes, on some you will have less. On some, the pedestals will fit more flush than others due to the shape of different trunk lids.
Some trunk lids have an extra layer of sheet metal underneath. In this case, you will need to drill a wider hole underneath in that extra layer first. This will give you room to get your bolt driver in to tighten the bolts to the trunk lid. If you use a metal hole saw bit, it will leave a clean hole. If you want to cover it afterwards, you can use a plastic cap or a felt circle. (This technique is the same for some custom spoiler installations that have holes that align differently from a factory spoiler).
TYPES OF CAR SPOILERSUNIVERSAL WINGS UNIVERSAL FIT Car spoilers and wings are one of the most popular car accessories available on the aftermarket. From mild to wild, a UNIVERSAL WINGS UNIVERSAL FIT car spoiler can change the entire look of the rear of your vehicle. You can choose from the standard OEM style factory spoiler, a custom factory style spoiler (if available), or if you like to be different you can choose from one of our custom spoilers that are available in our universal spoilers section.
Factory car spoilers are what make up most of the spoiler aftermarket. You will find some vehicles come standard with a spoiler now, like the Ford Mustang spoiler, the Scion tC spoiler and the Toyota Yaris spoilers, and it may even include the UNIVERSAL WINGS UNIVERSAL FIT. This style of a car spoiler is usually more of a lower profile, mildly agressive type of a spoiler, a more common type found on many cars, and are usually pleasing to the eye with their sporty appearance. If you like the factory look and like to dress up your car without getting carried away, then a factory spoiler is probably for you.
Rear lip spoilers are flush mounted to the rear deck lid. They usually sit on the lip or edge of the trunk just where the lid curves down towards the bumper. It has a very low profile, and gives the sleek appearance of a luxury car. Cars that have a lip spoiler are not trying to make a statement, more likely they would give the car a more high end appearance. Rear lip spoilers are usually found on luxury cars like the Infinity M45 spoiler or the Mercedes CLS Spoiler.
Universal spoilers fit many different makes and models of cars and some trucks. They are not model specific. What that means to you is that YOU HAVE OPTIONS!! Sometimes people don't want to follow the normal protocol. They want to be different. They want their own identity. Universal Custom spoilers give you that opportunity to change everything. From a lip style to the supra style spoilers and bat wings, once installed all bets are off and you and your car will be different. All universal spoilers have diagrams showing the dimensions and the bolt patterns of the spoiler so you can lay it out on your deck lid before you purchase the spoiler. The diagram will show where all of the holes are, and the dimensions of the spoiler front to back.