Body Side Moldings

7/16 Body Side Molding, High Gloss Colors - Roll Stock.

Half Round Shape Body Molding available in many Universal Colors to match your vehicle's finish.

Almost 1/2 inch wide, this narrow trim molding gives conservative styling but still provides protection on car doors and truck body panels. High Gloss Colors available in varying roll sizes to accommodate cars, trucks and RV's. Vinyl trim moulding is also suitable for industrial and commercial applications.

7/16 inch Chrome Flexible Corner Molding.

Flexible chrome trim molding with notch on back side provides hinge effect, bending up to 90 degrees in either direction for coverage on inside corners, outside corners, or flat surfaces. Great for protecting corners, hiding gaps and seams, and use flat for a simple chrome accent trim.

1/2 inch Half Round Style Body Side Molding, Chrome 25 Ft, 125 Ft Rolls.

Universal Chrome Half Round Molding can be used for protection on vehicles and is also suitable for industrial and commercial applications.

1/2 inch Flat Body Side Molding Black or Chrome

1/2 inch Flat Profile Trim Molding, available in Chrome or Black.

Thin profile allows flexibility to trim around wheel well openings, bumpers, grilles and accessories. Flat Profile trim also provides a classic look as Chrome Body Side Moldings.

Thin and flexible, this molding and has many universal uses for home, commercial and industrial applications.

9/16 inch Black Trapezoid Style Body Side Molding 25 Ft Roll.

This car molding's unique shape and 3/8 inch extension gives maximum protection from door dings. Trim moulding is suitable for multiple purposes - vehicles and industrial applications.

9/16 inch Bright White Smooth Finish Body Side Molding 24 Ft Roll.

White European Style Body Side Molding with Smooth Finish. Suitable for Car moldings and for commercial and industrial trim uses.

9/16 inch Smooth Style Body Side Molding in Various Colors.

Black Body Side Molding with Smooth Finish. Suitable for Car moldings, commercial and industrial trim uses.

9/16 inch Low Profile Black Grain Embossed Body Side Molding 30 Ft Roll

Black Body Side Molding with Embossed Grain pattern replicates style seen on older Classic Cars. Also suitable for running board trim, RV trim, and other Commercial and Industrial moulding uses.

5/8 inch Aluminum Rivet-On Channel Molding.

Aluminum Body Side Molding as seen on older Datsun 280Z, 280ZX, 300ZX, Jaguars, Impala, Caprice, Cutlass, Olds 88,Cadillac DeVille, and other 60's, 70's and 80's Luxury Sedans. This molding is also used for running board trim, trunk deck lid protection trim molding, Landau Top aluminum trim, Limo side moldings, Tailgate protection trim, and motorcycle saddle bag trim strips. Each Pc is 5/8 inches wide and comes in various Lengths. Available in Chrome or Gold.

Note: 1. Requires special packaging to ship, Oversized Shipping and Handling charges apply to this item. 2. Oversized item, Ships USA and Canada destinations only. 3. End Tips and Vinyl Insert Color Trim sold separately.

5/8 inch Chrome Edge w/ Black Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

5/8 inch Chrome Edge w/ Chrome Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

5/8 inch Chrome Edge w/ Custom Color Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

5/8 inch Chrome Edge w/ White Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

5/8 inch European Black Light Grain Style Body Side Molding 24 Ft or 100 Ft Rolls

Black Body Side Molding with slight grain pattern replicates style seen on European Cars. Also suitable for running board trim, RV trim, and other Commercial and Industrial moulding uses.

5/8 inch European Smooth Body Side Molding, Matte Black Paintable 24 Ft Roll.

Universal Body Side Molding with smooth Matte Black finish. Can be painted after suitable prepping.

5/8 inch Trapezoid Style Body Side Molding, Gloss Black 26 Ft Roll.

Universal Black Body Side Molding can be used on cars, trucks, SUV's and is also suitable for industrial and commercial applications.

5/8 inch Trapezoid Style Body Side Molding, Chrome 26 Ft Roll.

Universal Chrome Body Side Molding can be used on cars, trucks, SUV's and is also suitable for industrial and commercial applications.

5/8 inch Beveled Body Side Molding - Chrome, 20 Ft or 50 Ft Rolls.

Universal Chrome Body Side Molding is can be used on cars, trucks, RVs and is also suitable for industrial and commercial applications.

3/4 inch Flat Ultra Flexible Trim and Wheel Well Molding, High Gloss Black or Chrome.

Thin Accent Trim Molding, for Body Side Molding, and Wheel Well Molding. Ultra Flexible Thin Black or Chrome Trim molding for wheel well protection as well as exterior chrome molding accents. Can be used as decorative accent molding for interior or exterior use. Larger rolls are suitable for industrial and commercial applications.

3/4 inch Universal Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Body Side Door Trim Molding Fits all Model Cars, Trucks and SUV's. Available in Colors.

3/4 inch Chevy Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Chevy Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Chevy, GMC, Buick, Cadillac and GM brand Model Cars, Trucks and SUV's. Available in many Colors. Suggested Chevy and GM Models: Body Side Moldings for Camaro, Cruze, Equinox, Impala, Malibu, Sonic, Spark, Traverse, Trax, Volt, Colorado, Canyon, Silverado, Sierra, Suburban, Tahoe, Yukon, Acadia, Terrain, Denali, Cadillac ATS, CT6, CTS, Escalade, XTS, Buick Cascada, Enclave, Encore, LaCrosse, and Regal Body Side Molding.

3/4 inch Ford Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Ford Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Ford and Lincoln Model Cars, Trucks and SUV's. Available in many Colors. Suggested Models: Body Side Moldings for Ford Fiesta, Focus, Fusion, Mustang, Taurus, EcoSport, Edge, Escape, Expedition, Explorer, F150 and Super Duty Body Side Molding. Lincoln Continental, MKC, MKT, MKX, MKZ, and Navigator Body Side Moldings.

3/4 inch Honda Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Honda Body Side Door Trim Molding Fits all Honda and Acura Model Cars, Trucks and SUV's. Available in Colors. Suggested Honda Models: Honda Body Side Moldings for Accord, Civic, Clarity, Fit, and HR-V Body Side Molding. Suggested Acura Models: Acura Body Side Moldings for ILX, RLX, and TLX Body Side Molding.

3/4 inch Nissan Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Nissan Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Nissan and Infiniti Model Cars, Trucks and SUV's. Available in many Colors. Suggested Models: Nissan Body Side Moldings for 370Z, Altima, Armada, Leaf, Maxima, Rogue, Sentra, and Versa Body Side Molding. Suggested Infiniti Models: Infiniti Body Side Moldings for Q50, Q60, Q70, QX30, and QX60 Body Side Molding.

3/4 inch Toyota Factory Style Body Side Molding w/ Angled Ends in Factory Colors.

Factory Style Toyota Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Toyota model cars, SUV's and trucks. Comes in Toyota Factory Colors. Suggested Models: Toyota Body Side Moldings for Avalon, Camry, Corolla, C-HR, Prius, Venza, Yaris, and Toyota 86 Body Side Molding.

7/8 inch Chrome Edge w/ Black Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

7/8 inch Chrome Edge w/ Chrome Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

7/8 inch Chrome Edge w/ Custom Color Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

7/8 inch Chrome Edge w/ White Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

7/8 inch Flat Black Paintable Body Side Molding 30 Ft Roll.

Matte Black finish allows for painting molding to match your vehicle color. This car and truck trim has a triangular profile with 3/8 inch extension giving maximum protection from door dings.

15/16 inch Rounded Body Side Molding Chrome w/ Tapered Ends -2 Pc Set, 8 Ft each Pc.

Approx. 1 inch tall, this popular chrome molding fits all cars. Half-round profile offers great protection against door dings. 16 Ft total Kit includes two 8 Ft vinyl body side molding pieces for each side of the vehicle, with tapered die cut ends. Cut in the middle as needed for length.

15/16 inch Rounded Body Side Molding Chrome Roll Stock 30 Ft

About 1 inch tall, this half round trim molding adds a chrome accent. Great body side molding for cars, trucks, SUV's and RVs. Thicker side profile offers superior protection. Roll stock provides longer length for commercial and industrial applications.

1 inch Universal Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Body Side Door Trim Molding Fits all Model Cars, Trucks and SUV's. Available in many Colors.

1 inch Honda Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Honda Body Side Door Trim Molding Fits all Honda and Acura Model Cars, Trucks and SUV's. Available in many Colors. Suggested Honda Models: Honda Body Side Moldings for Accord, Civic, Clarity, Fit, and HR-V Body Side Molding. Suggested Acura Models: Acura Body Side Moldings for ILX, RLX, and TLX Body Side Molding.

1 inch Nissan Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Nissan Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Nissan and Infiniti Model Cars, Trucks and SUV's. Available in many Colors. Suggested Models: Nissan Body Side Moldings for 370Z, Altima, Armada, Leaf, Maxima, Rogue, Sentra, and Versa Body Side Molding. Suggested Infiniti Models: Infiniti Body Side Moldings for Q50, Q60, Q70, QX30, and QX60 Body Side Molding.

1 inch Toyota Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Toyota Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Toyota model cars, SUV's and trucks. Comes in Toyota Factory Colors. Suggested Models: Toyota Body Side Moldings for Avalon, Camry, Corolla, C-HR, Prius, Venza, Yaris, and Toyota 86 Body Side Molding.

1 inch European Style Black Embossed or Smooth Matte Black Body Side Molding, Roll Stock.

Styled after European vehicle factory moldings, this body trim molding comes Embossed with a slight grain texture, or Smooth Matte Black Finish(Paintable.

1 inch European Style Chrome Finish Body Side Molding 12 Ft, 24 Ft or 100 Ft Rolls.

Classic Euro Style Smooth finish Chrome trim vinyl molding. Universal uses for vehicles, commercial and industrial applications.

1 inch Universal Style Hi-Gloss Colors Body Side Molding 16 Ft Roll.

Glossy Car Trim Molding has a slight pitch in center profile for added protection from door dings. Available in several Color options.

1 inch Chrome w/Black Body Side Molding 20 Ft or 50 Ft Rolls.

Chrome and Black Trim molding as seen on Dodge and Chrysler cars. Flatter profile provides a simple decorative addition as well as protecting your car's finish. 50 Ft roll available for other trim uses that require longer applications.

1 inch European Smooth Style White Body Side Molding 12 Ft or 24 Ft Rolls.

Classic Euro Style Smooth finish White vinyl trim Molding. Universal uses for vehicles, commercial and industrial applications.

1 inch Flexible Inside and Outside Corner Molding and Ridge Line Molding, Chrome.

Flexible chrome trim molding with notched groove on back side provides hinge effect, bending up to 90 degrees in either direction for coverage on inside corners, outside corners, or flat surfaces. Great for bending around Bumpers, covering ridge lines too! Use on Tailgates, Trailers, Side Moldings, Industrial and Commercial applications.

1 1/8 inch Chevy Astro Van Style Body Side Molding, Black w/ Chrome or All Black - 16 Ft Roll

Stylish trim molding replicates the Chevy Astro van belt line molding. Universal, fits all cars and trucks. Available in Black w/Chrome or All Black.

1 1/8 inch Banded Molding w/ Tapered End Tips, 2 Pcs x 12 Ft ea. (24 Ft Total)

Slimline Glossy Body Side Molding with pre-tapered, die cut end points gives cars, trucks and SUVs Factory trim styling. 24 Ft total Kit includes two 12 Ft vinyl body side molding pieces for each side of the vehicle. Just cut in the middle as needed for length.

1 3/16 inch Chrome Edge w/Black Center Body Side Molding Roll Stock - 60 Ft Roll.

Roll stock with straight ends, suitable for longer trim molding applications on RVs, commercial trucks and other industrial trim moulding applications.

1 3/16 inch Chrome Edge w/ Black Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. For Factory Style look on 1974-1976 Impala and Caprice, just cut end at an angle in front and squared-off in rear. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

1 1/4 inch Chrome Edge w/ Chrome Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. For Factory Style look on 1974-1976 Impala and Caprice, just cut end at an angle in front and squared-off in rear. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

1 3/16 inch Chrome Edge w/ Custom Colors Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. For Factory Style look on 1974-1976 Impala and Caprice, just cut end at an angle in front and squared-off in rear. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

1 3/16 inch Chrome Edge w/ White Center Body Side Molding w/ Pointed Ends - 2 Pc Set, 13 Ft each pc.

26 Ft total Car Trim Kit. Includes Two 13 Ft vinyl pieces for each side of the vehicle with closed Finished Points at each end. Just cut in middle as needed for door breaks. This molding is commonly used on todays cars as well as classic cars and muscle cars of the 60's, 70's and 80's and larger sedans like Cadillac, Oldsmobile and Buick.

1 5/16 inch Rounded Molding w/ Tapered Shaped Ends Black -2 Pc Set, 7 Ft each Pc.

Popular Black Body Side Molding with pre-shaped ends gives cars, trucks and SUVs Factory trim styling. 14 Ft total Kit includes two 7 Ft vinyl body side molding pieces for each side of the vehicle, with pointed ends. Just cut in the middle as needed for length.

1 5/16 inch Rounded Molding w/ Tapered Shaped Ends Chrome -2 Pc Set, 7 Ft each Pc.

Popular Chrome Body Side Molding with pre-shaped ends gives cars, trucks and SUVs Factory trim styling. 14 Ft total Kit includes two 7 Ft vinyl body side molding pieces for each side of the vehicle, with pointed ends. Just cut in the middle as needed for length.

Universal Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Body Side Door Trim Molding Fits all Model Cars, Trucks and SUV's. Available in Colors.

Honda Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Honda Body Side Door Trim Molding. Fits all Honda and Acura model cars, SUV's and trucks. Available in many Colors.
Suggested Honda Models: Honda Body Side Moldings for Accord, Civic, Clarity, CR-V, Fit, HR-V, Odyssey, Pilot, and Ridgeline Body Side Molding. Suggested Acura Models: Acura Body Side Moldings for ILX, MDX, RDX, RLX, and TLX Body Side Molding.

Nissan Factory Style Body Side Molding w/ Pointed Ends in Colors.

Factory Style Nissan Body Side Door Trim Molding. Fits all Nissan and Infiniti model cars, SUV's and trucks. Available in many Colors.
Suggested Models: Nissan Body Side Moldings for 370Z, Altima, Armada, Frontier, Leaf, Maxima, Murano, Pathfinder, Rogue, Sentra, Titan, and Versa Body Side Molding. Suggested Infiniti Models: Infiniti Body Side Moldings for Q50, Q60, Q70, QX30, QX60 and QX80 Body Side Molding.

Toyota Factory Style Body Side Molding w/ Pointed Ends in Factory Colors.

Factory Style Toyota Body Side Door Trim Molding. Fits all Toyota and Lexus model cars, SUV's and trucks. Comes in Toyota/ Lexus Factory Colors.
Suggested Toyota Models: Toyota Body Side Moldings for Avalon, Camry, Corolla, C-HR, Highlander, Land Cruiser, Prius, Rav4, Sequoia, Sienna, Tacoma, Tundra, Venza, Yaris 4Runner and Toyota 86 Body Side Molding. Suggested Lexus Models: Lexus Body Side Moldings for ES350, ES300H, GS300, GS350, GS450, and GS F Body Side Molding.

Universal Factory Style Body Side Molding w/ Chrome Strip and Angled Ends, Available in Colors.

Factory Style Body Side Door Trim Molding with Chrome, Fits all Model Cars, Trucks and SUV's. Available in Colors.

Universal Factory Style Body Side Molding w/ Angled Ends in Colors.

Factory Style Body Side Door Trim Molding Fits all Model Cars, Trucks and SUV's. Available in Colors.

Chevy Factory Style Body Side Molding w/ Angled Ends Available in Colors.

Factory Style Chevy Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Chevy, GMC, Buick, Cadillac and GM brand Model Cars, Trucks and SUV's. Available in many Colors. Suggested Chevy and GM Models: Body Side Moldings for Camaro, Cruze, Equinox, Impala, Malibu, Sonic, Spark, Traverse, Trax, Volt, Colorado, Canyon, Silverado, Sierra, Suburban, Tahoe, Yukon, Acadia, Terrain, Denali, Cadillac ATS, CT6, CTS, Escalade, XTS, Buick Cascada, Enclave, Encore, LaCrosse, and Regal Body Side Molding.

Ford Factory Style Body Side Molding w/ Angled Ends Available in Colors.

Factory Style Ford Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Ford and Lincoln Model Cars, Trucks and SUV's. Available in many Colors. Suggested Models: Body Side Moldings for Ford Fiesta, Focus, Fusion, Mustang, Taurus, EcoSport, Edge, Escape, Expedition, Explorer, F150 and Super Duty Body Side Molding. Lincoln Continental, MKC, MKT, MKX, MKZ, and Navigator Body Side Moldings.

Honda Factory Style Body Side Molding w/ Angled Ends Available in Colors.

Factory Style Honda Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Honda and Acura Model Cars, and SUV's. Available in many Colors. Suggested Honda Models: Honda Body Side Moldings for Accord, Civic, Clarity, CR-V, Fit, HR-V, Odyssey, Pilot, and Ridgeline Body Side Molding. Suggested Acura Models: Acura Body Side Moldings for ILX, MDX, RDX, RLX, and TLX Body Side Molding.

Nissan Factory Style Body Side Molding w/ Angled Ends Available in Colors.

Factory Style Nissan Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Nissan and Infiniti Model Cars, Trucks and SUV's. Available in many Colors. Suggested Models: Nissan Body Side Moldings for 370Z, Altima, Armada, Frontier, Leaf, Maxima, Murano, Pathfinder, Rogue, Sentra, Titan, and Versa Body Side Molding. Suggested Infiniti Models: Infiniti Body Side Moldings for Q50, Q60, Q70, QX30, QX60 and QX80 Body Side Molding.

Toyota Factory Style Body Side Molding w/ Angled Ends in Factory Colors.

Factory Style Toyota Body Side Door Trim Molding, protects car doors from dings and chips. Fits all Toyota and Lexus model cars, SUV's and trucks. Comes in Toyota/ Lexus Factory Colors. Suggested Toyota Models: Toyota Body Side Moldings for Avalon, Camry, Corolla, C-HR, Highlander, Land Cruiser, Prius, Rav4, Sequoia, Sienna, Tacoma, Tundra, Venza, Yaris 4Runner and Toyota 86 Body Side Molding. Suggested Lexus Models: Lexus Body Side Moldings for ES350, ES300H, GS300, GS350, GS450, and GS F Body Side Molding.

1 3/8 inch Universal Body Side Molding Flat Black Paintable

Body Side Molding is Paintable to match your vehicle color, or use as-is in Flat, Matte Black finish.

Sleek, Band Shaped Trim Molding is suitable for side moldings and bumpers for vehicles. Universal trim for commercial and industrial uses.

1 3/8 inch Universal Body Side Molding Gloss Finish.

Universal Band Body Side Molding in Glossy Finish. Suitable for car side trim and bumpers. Universal trim molding can be used for commercial and industrial applications.

1 3/8 inch Flat Body Side Molding Chrome

Flat Profile, Band- Shaped Side Molding provides a sleek look with a Chrome accent and has many universal uses.
This flexible vinyl trim molding is versatile - can be applied to bumpers or used in other project applications as a band molding or seam cover molding.

1 1/2 inch Dodge Dakota Style Body Side Molding Black 20 Ft Roll.

Trim Molding replicates the 1997 Dodge Dakota Factory Body Side Molding. Thicker profile for maximum protection. Classic Look, Universal Molding is suitable for all trucks and other trim moulding uses.

1 1/2 inch Dodge Caravan Style Body Side Molding Chrome or Black

Molding replicates the original Caravan/Voyager Body Insert Trim. Flat profile is excellent for use on all cars, trucks, RVs, commercial and industrial applications.

1 7/8 inch Universal Truck and Van Body Side Molding Black w/Chrome 16 Ft or 50 Ft Rolls.

Black w/Chrome Universal Side Trim Molding fits all cars, trucks and vans.

1 7/8 inch Universal Truck and Van Body Side Molding All Black Roll

All Black Universal Side Trim Molding has 1/4 inch groove to leave just Black, or add 1/4 inch Color Pinstriping Tape for a Decorative Accent.

1 7/8 inch Dodge Ram Style Body Side Molding Black 19 Ft Roll

Side trim molding replicates 1998 Dodge Ram Factory Body Side Molding. Thicker, Triangular profile offers maximum protection from door dings. Very popular for all makes and model trucks.

2 inch Universal Truck and RV Body Side Molding Roll Stock.

Very popular Universal Molding for side body trim, tailgates, bumpers and other uses for Trucks, RVs, Commercial and Industrial applications. Paintable after suitable prepping.

2 inch Universal Truck Body Side Molding Chrome Roll Stock.

Universal Chrome Body Side Molding 2 inches wide, in various roll sizes to accommodate cars, SUVs, small pickups and full size trucks. Longer length rolls are suitable for Stretch Limos, Courtesy Shuttles, RVs,commercial and industrial applications. Tip: To get an OEM look, Add our matching MDG144CHR double-ended pointed trim molding set to this roll stock.

2 inch Universal Truck and RV Body Side Molding Roll Stock

Universal Smooth White Body Molding for RV's and Large Trucks. Suitable for Commercial and Industrial applications.

2 inch Sierra Style Body Side Molding with Pre-Finished Rounded Ends, Black - 2 Pc Set, 8 Ft each pc.

Black Side trim replicates the 1999 GMC Sierra Factory Body Side Molding. 16 Ft total Kit includes two 8 Ft vinyl pieces with rounded points at each end. Best seller for universal applications for all makes and model trucks.

2 inch Sierra Style Body Side Molding with Pre-Finished Rounded Ends, Chrome - 2 Pc Set, 8 Ft each pc.

Chrome Side trim replicates the 1999 GMC Sierra Factory Body Side Molding. 16 Ft total Kit includes two 8 Ft vinyl pieces with rounded points at each end. Best seller for universal applications for all makes and model trucks.

2 inch Universal Body Side Molding w/ Rounded Ends, Colors and is Paintable - 4 Pc Set (2 x 53 inch plus 2 x 42 inch pcs).

Replicates 1996 Chevy Cavalier original Body Side Moldings with longer pc for doors and shorter pc for body. Classic Factory styling and 2 inch width makes this molding very suitable for all makes and model trucks, cars and SUVs. Cut from inside squared-end as necessary for size. Available in Glossy Colors and is Paintable.

Note: Colors are Paintable-Paint over any color to match your vehicle, just sand and prime first.

2 inch Ford Truck Style Body Side Molding Black w/Chrome 26 Ft Roll.

Black & Chrome Side Molding replicates the 1992 Ford Truck Factory Body Side Molding. Universal fit for all cars and trucks.

2 inch Dodge Ram Style Body Side Molding Black w/Chrome 24 Ft Roll.

Our popular side molding trim replicates the 1994 Dodge Ram Factory Body Side Molding. Universal fit for all cars and trucks.

2 inch Universal Factory Style Body Side Molding w/ Chrome Strip and Angled Ends.

2 inch wide Factory Style Body Side Door Trim Molding with Chrome, Fits all Model Cars, Trucks and SUV's.

Universal 2 inch Factory Style Body Side Molding w/ Angled Ends.

2 inch Wide Factory Style Body Side Molding w/ Angled Ends.

2 1/4 inch Chevy Silverado Style Body Side Molding Chrome w/ Black Center.

Side Trim molding replicates the older Chevy CK / GMC Truck Silverado Trim Level original style Factory Body Side Molding. Chrome Edges with Black Center. Universal trim for all newer and older trucks, RVs, commercial and industrial applications.

2 1/4 inch Chevy Silverado Style Body Side Molding Chrome w/ Chrome Center.

Side Trim molding replicates the older Chevy CK / GMC Truck Silverado Trim Level original style Factory Body Side Molding. Chrome Edges with Chrome Center. Universal trim molding is suitable for all newer and older trucks, RVs, commercial and industrial applications.

2 7/16 inch Ford Truck Style Body Side Molding, Glossy Black 20 Ft or 40 Ft Rolls.

Side Molding replicates the 2002 Ford Truck Factory Body Side Molding. Popular size and profile makes this trim suitable for all trucks, vans, SUVs and RVs.

2.56 inch Chevy Truck and GMC Body Side Molding, Factory Style, Black w/Chrome or All Black.

Replicates 1988-1998 Chevy CK Pickup Cheyenne Trim, Silverado, Blazer, Tahoe and Suburban Factory Style Truck Body Side Molding, as well as GMC Pickup, Sierra, Jimmy, Suburban and Yukon Body Side Moldings. Trim is also used for Chevy and GMC Bumper Trim Moldings and Tailgate Moldings. Very popular side trim is universal fit for all older and newer trucks, vans and SUVs.

2 1/2 inch Ford Truck Style Body Side Molding Black w/Chrome 20 Ft Roll.

Trim Molding replicates the 1997 Ford Truck Factory Body Side Molding. Over 1/2 inch thicker profile allows maximum protection of vehicle finish. Suitable for all make and model trucks.

2 5/8 inch Chevy S-10 Style Body Side Molding Black w/Chrome 20 Ft Roll.

Side Trim Molding replicates the older Chevy S10 Factory Body Side Molding. Our Popular molding is suitable for all newer and older trucks, makes and models.

3 inch Ford Truck Style Body Side Molding Black w/Chrome 26 Ft Roll.

Side Molding replicates the older Ford Truck Factory Body Side Molding. Stylish profile is suitable for all newer and older trucks.

3 inch Astro Van Style Body Side Molding Dark Silver w/Chrome 20 Ft Roll.

Trim molding replicates the Chevy Astro Van Factory Body Side Molding.

3 inch Chevy S-10 Style Body Side Molding Black w/Chrome 20 Ft Roll.

Side Trim Molding replicates the 1994 Chevy S10 Factory Body Side Molding. Stylish side molding is very popular and universal fit for all makes and model trucks.

3 1/8 inch Chevy S-10 Style Body Side Molding Black w/Chrome 16 Ft Roll.

Side Trim Molding replicates the 1998 Chevy S10 Factory Body Side Molding. Thicker profile offers good protection of vehicle's finish.

3 1/4 inch Universal Truck Body Side Molding Kit Black Grain Finish 16 Ft Roll

This wide, square profile side molding trim adds a factory look to suit newer truck styles like Chevy Silverado and Colorado /Canyon without being too bulky. Lightly Grained Finish keeps this body molding from looking too plain. Trim molding is suitable for Longer Trucks, RVs, commercial and industrial applications.

3 1/4 inch Universal Truck Body Side Molding Kit Black Smooth Finish 16 Ft Roll

This wide, square profile side molding trim adds a factory look to suit newer truck styles without being too bulky. Smooth gloss finish used as-is, or can also be prepped for painting, if desired. Trim molding is suitable for Longer Trucks, RVs, commercial and industrial applications.

3 3/8 inch Universal Chrome Truck Body Side Molding Build-up Package - 3 Pc Set, 20 Ft Rolls.

Wide Chrome Body Side Molding is created using 3-Step method, using 2 inch, 1 inch and 3/8 inch chrome moldings. Build up using widest molding at bottom and narrow at the top. Separate rolls allows flexibility of design-- eliminate one roll if you prefer a shorter width (e.g. 2 3/8 inch molding or 3 inch molding). Extra or unused roll(s) can be used for wheel well trim or bumper molding.

3.75 inch Universal Chrome Truck Body Side Molding Build-up Package - 4 Pc Set, 20 Ft Rolls.

Extra Wide Chrome Body Side Molding is created using 3-Step method, using 2 inch, 1 inch and 3/8 inch chrome moldings. Build up using widest molding at bottom and narrow at the top. Separate rolls allows flexibility of design-- eliminate one roll if you prefer a shorter width (e.g. 2 3/4 inch molding or 3 3/8 inch molding). Extra or unused roll(s) can be used for wheel well trim or bumper molding.

3 7/8 inch Chevy Silverado Style Body Side Molding Black w/ Chrome, 16 Ft Roll.

A replication of the 1999 Chevy Silverado Factory Body Side Molding. Universal size molding fits Trucks and SUVs.

4 3/16 inch Chevy/ GMC 2003-2006 Truck Factory Style Body Side Molding Black w/Chrome and Rounded End - 4 Pc Set (4 x 55 inch pcs).

Body Side Molding replicates the Original Factory Style Trim Molding for 2003-2006 Tahoe/ Yukon/ Silverado/ Avalanche trucks. Side trim molding has specific curvature to fit the body of 2003-2006 models only. Cut from straight end of each piece as needed for appropriate length.

Note: Molding is Not Universal Fit. Side Molding fits 2003-2006 Chevy/GMC trucks only.